Incorporated with sophisticated techniques, our quality assortment of Spin Flash Dryers is superlatively used utilized at industrial level to dry products such as paste, slurry and cake which are typical to be dried. These dryers are developed in compacted design by employing cutting edge techniques to ensure precise material feeding by means of screw feeder at variable speed into vertical drying chamber for heating up the material by hot air. According to the application, the dryer performs direct and indirect heating of the air.


    Accomplished with bag filter and cyclone separator for collecting dry powder
    Free from deposits
    Operate under negative pressure ensuring dust free operation
    Superiorly dry cohesive and non-cohesive pastes, cakes and highly viscous products
    Chemical and thermal resistant
    No sticking and accumulation
    Equipped with top suction fan or ID fan to passage out the air
    Control the feed discharge at variable speed by means of feed screw


    1) Material is directly fed from filter press to dryer.
    2) Less drying time hence less labour handling and quick production.
    3) Less electricity load
    4) Space is 1/3 that of Spray dryer
    5) Various product range.
    6) Energy consumption saving.
    7) Fuel consumption saving.
    8) Influence of heat on heat sensitive products is remarkably low even at high temperature.
    9) Lump breaker with variable speed feed screw feeder for non clogging of feed.
    10) Only two operators are required to operate the plant instead of number of laborers in conventional drying system.
    11) The environmental conditions remains clean


    The product is fed to the feed Agitator which is connected to a variable speed screw conveyor and conveyed to the Spin flash chamber in a rated capacity. The air is heated by passing over indirect fired hot air generator. The material come to the spin flash chamber get disintegrated between the rotating spins and simultaneously dried within the hot air media. Dried product is collected from the bottom of bag filter. A separate control panel mounted with instruments is also provided. The material of construction of equipment depends on the product to be dried. The advantage of the system is that it can be operated at high temperature for non sensitive products.

Magtech Process Equipments Pvt. Ltd.

Plot No. 320-321, Ecotech 1 Extension, Greater
Noida, Gautam Budh Nagar-201306 ( U. P.) India.

Magtech Process Equipments Pvt. Ltd
Technocrats in Filtration & Drying System
For Api,Pharameaceutical & Chemical industry
@Magtech Process Equipments Pvt. Ltd.All right reserved.Designed & Developed by techmobia.com